|
I had to slice the 1 x 1 tubing to bend it since I don't have a bender. Then I bent it to fit the back of the passenger compartm
Date: 02/08/2004
Views: 443
|
Gaps welded & ground. Built a mini cage inside of body to support it & make it easier to mount to the frame.
Date: 02/08/2004
Views: 424
|
Side view before saw & grinder.
Date: 02/08/2004
Views: 443
|
|
Grinding off the tack welds. The doors were never finished, just tack welded in place. Even the front & back were done just
Date: 02/08/2004
Views: 413
|
My slicks for the Antique drags.
Date: 02/08/2004
Views: 435
|
Old stock car throwaways.
Date: 02/08/2004
Views: 415
|
|
Cutting the top. Two sheets of plywood, totals 1 1/8" thick.
Date: 02/08/2004
Views: 440
|
Hmmm, I might have to make this into a "T" top......
Date: 02/08/2004
Views: 410
|
Frame back in garage after some rework. Added some higher 4-link brackets to make up for the change in ride height. Added some b
Date: 02/08/2004
Views: 453
|
